Shop By
CATEGORY
MANUFACTURER
PRICE
Information
Shopping Cart
Specials
Featured
Seagull DSLR-LCD Viewfinder
 Click to enlarge |
|
DSLR-LCD Viewfinder solves 3 major digital problems
The emergence of more and more Digital Single Lens Reflex Cameras that crossover into the film making area has created more than one problem for the enthusiast:
1. The necessity to view images continuously on the LCD screen which, in turn, effects stability and thus focus where the camera has to be handheld away from the body.
2. The inability to actually ‘see’ any image on that same screen when working in any bright lighting conditions.
3. Trying to ascertain the depth-of-field, even if you can discern that image.
SEAGULL’S DSLR-LCD FINDER SOLVES THESE…..and more!
How? By providing a finder that gives you a nice, large 3-inch LCD image to work with, and then adds a 3x magnification for extra clarity. What’s more, it features quality optics consisting of three elements arranged in 3 groups.
Clipping onto the rear of your DSLR finder it provides the perfect environment for comfortable viewing incorporating, as it does, a soft motion-picture type moulded eyecup to block out extraneous light - thus letting you view a perfect image. It also offers an excellent range of continuous dioptre variations between + 4 and -4 to accommodate glass wearers. The combination of these features allows you to bring the camera in close to your body for increased stability and secure viewing and filming.
The SEAGULL DSLR-LCD FINDER is an essential tool for any serious film maker. Without it, that grouping of a small LCD screen, manual focus, razor thin shallow depth-of-field, camera shake, sunlight and glare makes shooting a video an hit-andmiss affair......
.....with it, the control is all yours!
FIts to cameras 3" LCD display by a self adhesive coupling. Additional couplings available.
LCD ViewFinder Installation Instructions
1. Remove LCD viewfinder from packaging. The rubber eyecup should be attached. The mounting frame is installed on the open end of the LCD viewfinder.
2. Pull off the mounting frame from the LCD viewfinder and place the camera face down on either capped camera body or capped lens so the LCD faces straight up.
3 If possible, take camera into subdued light. Turn camera on and hit Menu button. This should light up the picture area for placement of the mounting frame.
4. Take the mounting frame and peel off the adhesive protection, then with two hands( fingers on the four corners of the frame), slowly bring the frame down to the LCD screen being careful to align the edges of the frame to the edges of the light LCD image. Slowly continue down until there is contact. Before applying pressure make sure that the frame is aligned and square.
5. Apply pressure with some weight fully carefully. After hours, the LCD Viewfinder will snap on and off the frame.
6. The rubber eyecup can be oriented by simply rotating.
7. To remove the mounting frame, if needed, just pinch the top and bottom sides of the frame so that the seal brakes. Then with a fingernail pull up one corner.
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Click to enlarge
Click to enlarge
Click to enlarge
